Kel-Tec P11 Hard Chrome 9mm
Kel-Tec P11 Hard Chrome 9mm
TECHNICAL SPECIFICATIONS |
||
Calibers : |
9 x 19 mm Luger |
|
Weight unloaded lbs. : |
14 oz. |
400g |
Loaded magazine : |
6 oz. |
159g |
Length : |
5.6" |
142mm |
Height : |
4.3" |
109mm |
Width : |
1" |
26mm |
Barrel Length : |
3.1" |
79mm |
Sight radius : |
4.6" |
116mm |
Muzzle Energy Max : |
400 ft lbs |
540J |
Capacity : |
10 + 1 rounds |
|
Trigger Pull : |
9 lbs |
40N |
$ Sold
The P-11 is a semi-automatic,
locked breech pistol, chambered for the 9 mm Luger cartridge.
The firing mechanism is double action only. The magazine has a 10 or 9 round
capacity. The Kel- Tec P-11 is the smallest and lightest 9 mm ever made. Thanks
to its locking dynamics and superior ergonometry, perceived recoil and practical
accuracy are comparable to much larger guns. The P-11 is especially suited for
plainclothes police officers or as a secondary weapon for military personnel.
From the very beginning of the design and development, computers have been used
exclusively. All machined components are also made on modern high speed
computerized equipment. Equally advanced quality control equipment and test
procedures ensure a firearm with uncompromising quality in materials and
workmanship
The P-11 has six main component
groups: barrel, slide, frame, firing mechanism, grip, and magazine.
The barrel is made of SAE 4140 Ordnance steel heat treated to 47 HRC. The slide
is also 4140 steel, and contains the firing pin and the extractor. The
rectangular frame is machined from solid 7075-T6 aluminum and houses the firing
mechanism.
The trigger connects via a transfer bar to the hammer. The hammer is driven by a
novel free floating extension spring. The light weight firing pin transmits the
energy of the hammer to ignite the primer. The functioning of the mechanism
surpasses all applicable SAAMI safety standards.
The grip is made of the ultra high impact polymer DuPont ST-8018. The grip also
forms the magazine well and the trigger guard.
Normally supplied with a 10-round double column all steel magazine, the P-11
will also accept standard S&W large capacity clips. To improve the handling with
S&W magazines we recommend using our slip on magazine extension.